Commercial Range Buying Guide: Sizing Burners, Cooktops, and Oven Bases for Real Restaurant Volume

A thirty-six-inch six-burner range looks generous on an architectural drawing. Then your morning prep cook puts two fourteen-inch stockpots side-by-side on the back row, and suddenly you realize burner number two and burner number five are completely blocked. The line is crippled before service even starts.

Selecting a commercial range isn’t a checklist exercise. It’s about matching physical burner geometry, cookware footprint, and utility infrastructure to the exact speed of your saute station.

Cooktop Topography: Open Burners, Griddles, or Solid Tops?

Don’t default to six open burners just because it’s the industry baseline. Look at your real prep and service tickets:

  • Open Cast-Iron Burners (28,000 – 32,000 BTU/hr): Best for fast saute work, pan reductions, and rapid boiling. Direct flame transfer provides instant heat response, but loose drippings fall straight into the crumb tray. If your menu relies on heavy pan flipping, you want deep cast-iron grates that let pans slide across sections without tipping.
  • Solid Tops / French Tops: A continuous heavy cast plate heated from beneath. The center reaches searing temperatures while the outer edges stay at a gentle simmer. Cooks can slide four or five smaller reduction pans across one solid zone without juggling separate burner valves.
  • Combination Range Tops: Splitting a 36″ or 48″ chassis into four open burners plus a 12″ or 24″ commercial griddle section eliminates a separate footprint on the cookline, saving expensive hood space.
Range Configuration Width Typical Total BTU Best Operating Environment
4-Burner Compact Range 600 mm (24″) 110,000 – 130,000 Cafes, food trucks, small bistros with limited hood clearance.
6-Burner Standard Range (TGH Series) 900 mm (36″) 170,000 – 210,000 Standard restaurant hot lines, busy saute and sauce stations.
8 to 10 Burner Heavy Suite 1200 – 1500 mm (48″–60″) 260,000 – 340,000 High-volume banquet operations, hotel kitchens, institutional catering.

The Base: Static Oven, Convection Oven, or Cabinet Storage?

Too many restaurateurs automatically buy a range with a standard static gas oven underneath without asking if they will ever turn it on. In a fast-paced dinner rush, a cook bending down to pull a heavy sheet pan out of a 400°F oven door directly in front of the saute station creates dangerous cross-traffic.

Consider the alternatives:

  • Static Gas Oven Base: Great for roasting proteins, holding braises, or slow-baking casseroles. Natural convective air current means delicate custards and souffles won’t ripple.
  • Convection Oven Base: Built-in circulating fan cuts roasting times by 20% to 25% and ensures even color across multiple sheet pans. Note: requires a standard 120V or 230V electrical feed to power the fan motor.
  • Open Storage Base / Modular Mount: If you already have dedicated convection ovens or combis on your baking wall, buy an open storage base. It keeps daily saute pans and stockpots right where cooks can grab them, and eliminates a secondary pilot burner you don’t need.

Gas Plumbing Reality: Don’t Starve Your Burners

You can buy the most powerful 32,000 BTU burners on the market, but if your gas supply pipe is undersized, turning on all six burners simultaneously will cause the flame height to plummet by half.

Always verify pipe sizing with your plumber before delivery. Commercial ranges typically require a 3/4″ or 1″ rear NPT connection. Never reduce the supply line diameter before the primary appliance regulator. Ensure the manifold pressure is set correctly: Natural Gas systems operate at 4″ to 5″ Water Column (approx. 1000–1250 Pa), while Liquefied Petroleum Gas (LPG) runs at 10″ to 11″ W.C. (approx. 2500–2800 Pa). A burner jetted for natural gas hooked up to LPG will produce sooty, dangerous yellow flames.

Explore our complete factory line of heavy-gauge commercial gas ranges with oven bases, engineered with solid cast-iron grates and international CE certifications.

REQUEST A QUOTE

Leave your contact details and a short message. Our export team will follow up with you.